Loading
alex80it

Gravitrax compatible star crossing

by alex80it Apr 9, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

This is a very nice insert, and use it a lot, any chance you woudl do a 60 and 120 deg turn as well that could be put into your elevation system?

I gave it a try and designed a test part with both 60 and 120 angle turns on it, I noticed the 120 degrees one didn't look too bad...
https://www.thingiverse.com/thing:4099093

Please give it a try and let me know if and how it works! :)

Thanks!

Gravitrax Compatible 60-120 Degree Turn

That's not a bad idea at all, especially the 60 deg turn... I fear that a 120 deg turn wouldn't work very well, since the insert is very small and losing the thickness of the tile's "wall" would leave very little room for such a sharp turn to be smooth... I fear the marbles would all either jump out or get stuck in the turn... A 60 deg turn, however, should be no problem at all.
I might actually design it right now, if you are willing to test-print it for me (my Gravitrax sets are currently stored away... )