Drawn in Solidworks 2015
Designed to be printed on UP! Plus in ABS.
Support is essential.
Settings used: 0.15mm layers, vent open, loose fill, 4 layer surface, supports 3mm^2 x 80 degrees.
You need both Pack4-pt1 and Pack4-pt1.5 to have the full range of vehicles.
Cleaning out between a vehicle's tracks under the hull can prevent the ripping off of tracks and wheels. Cut down with a sharp knife beside the inner edges of the tracks if necessary to break any bridged supports that go right through the suspension.
Do not accept the default position of the models as gospel.
Use an orientation that works for you. I always print turrets with the gun parallel to the printer table, and vehicles with their tracks or wheels down onto the table.
Parasolid versions of all parts included in a seperate file.
In part 1.5, I got annoyed watching the printer knock off 3 wheel stubs from the Stryker in a single rapid traverse, so I tried an experiment. The Stryker has an optional file called ...raft, that has a strip under the wheels each side. This worked really well, and you can just tear off the strip when you pull off the supports
Pack 4 part 1 and part 1_5
E-100 with Maus 128mm turret (no shield, part shield, full shield)
E-100 with Maus 150mm turret (no shield, part shield, full shield)
E-100 with Krupp 128mm turret (no shield, part shield, full shield)
Marder I (Lorraine)
sFh 13-1sf (Lorraine) Sdkfz 135/1
Somua S-35 (French & German turrets)
Sdkfz 11/4 (open, closed)
Sdkfz 9 (open, part closed (x2), closed)
Pershing (no shields)
Pershing (full shields)
M4 Sherman with wading trunks
M12 155mm GMC
M30 ammo carrier
GMC CCKW 252 steel cab (open, closed)
GMC CCKW 252 closed cab (open, closed)
GMC CCKW 252 opencab (open, closed)
GMC CCKW 253 steel cab (open, closed)
GMC CCKW 253 closed cab (open, closed)
GMC CCKW 253 opencab (open, closed)
(All versions of GMC included, to make them easier to find)
Covenanter (Use Crusader I turret for early version, use Crusader II turret for late version.)
Crusader I (early) (Use Crusader I turret)
Crusader I (Use Crusader II turret)
Crusader II with MG turret (for very early vehicle use Crusader I hull)
Crusader II CS
Crusader III (full shields, no shields) ( for full shields, use Crusader II-III hull)
Crusader AA mk1 (40mm) (Use Crusader III no shields hull)
Crusader AA mk 2 (2x 20mm) (Use Crusader AA mk2 hull)
Crusader gun tractor
Valentine IX (use Valentine III-fuel hull)
Valentine XI (use Valentine III-fuel hull)
Bishop + limber
Morris C8 AT tractor (open, closed)
17pdr AT gun (deployed, packed)
STZ-5 light tractor (open, closed)
Komintern heavy tractor (open, closed)
Voroshilivets heavy tractor (open, closed)
B-4 204mm self-propelled howitzer
Zrinyi II (no shields, full shields)
Turan II (no shields, hull shields, turret shields)
Semovente m40 da 75/18
Semovente m41 da 75/18
Semovente m42 da 75/18
Semovente m42 da 75/34
Semovente m43 da 105/25
Carro comando m40
Carro comando m41
M14/41 (Use M13/40 turret)
Chi-Ha with aerial
UK (Post war):
Centurion III (no shields, full shields)
Centurion V (no shields, full shields,20pdr,105mm) (For 20pdr, use Centurion III turret)
Soviet Union (Post war):
USA (Post War):
M1126 Stryker ICV