I liked the remixed mount for the 25 degree camera angle that @joeostrander did so I modified the 32 degree one to hold the board like the 25 degree mount. The split 2 board is a bit taller so I added .5mm to the top and bottom for an added height so the frame wasn't crushing the board. I also took a bit off the sides for prop clearance. I had to do a small amount of filing to the hole where the lens comes through, fits nice and snug now. Due to the added height, a small washer or spacer is needed on the standoffs directly behind the mount. so the stress on the top plate is less.