This is a bicycle mount for having your smartphone centered in front of you on your bicycle.
It gives access to the power and volume buttons, to the aux input and to the home button.
The design is made for many different smartphone sizes and can be adjusted with the screw on the side.
It is designed for smartphones with a case, tested on my huawei p10 (no advertisement :) ).
The screw and nut should be printed with 0.1mm resolution otherwise it will get stuck while mounting things togehter.
I designed this, on base of the modular mounting system, because I did not find any generic phone holder, that would hold my phone with case like it should.
Feel free to remix :)
Requires: 4x / 2x cable ties to tie on the bike.
Please let me know, if it worked on your phone too or if it needed any adjustment.
doesen't matter PLA
I used Concentric build support with 10% support density, to be able to take the support out of the bike holding thing and put the cable ties inside.