Contents
Tags
Remixed From
License
Liked By View All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing TagMakes
Thing Statistics
Summary
Mashed Wades Geared Nema 17 with Adrian's hot end so I could check out Adrian's new hot end ( http://reprap.org/wiki/Geared_extruder_nozzle ) and another hot end by Tim. It is 14mm wider to allow 2 4mm bolts to attach to trapped 4mm nuts. This is only the extruder block the rest needs to be download from Wade\'s original extruder or other derivatives there of.
Warning - after some testing the bolts got too hot and pulled through the extruder block / redesign on the way.
Instructions
I had to replace the 40mm bolt that sticks up on the gear side of the x-carriage with a 25mm to keep it from interfering with the gear. The rest pretty much bolts up like you would expect.