MendelMax 1.5 with integrated electronics
by srepmub, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A heightened MendelMax 1.5, with integrated floorboard and electronics.
I just finished my 1.5 (lm8uu) build, and in the spirit of open source decided to list the important parts I used here.
First, I designed the following two things to be able to raise my MendelMax, so that I could mount the PSU and electronics inside, on an integrated floorboard:
To protect the PSU from falling debris, aluminum netting used in model building worked really well (awesome stuff btw):
Rather than print clips to hide the wiring, I found that electrical tape works well and looks great:
The following are wonderful x-ends, though they ended up a bit too flexible for my taste (may be my fault, or some parts are just too thin):
As for the x and y cars:
Extruder, also from Jonas Kuehling:
It's a bit ugly, but I couldn't find a better method to tension my x belt:
My heatbed consists of the following layers:
First, an aluminum plate, because we all like aluminum:
Second, a layer of cartboard wrapped in aluminum foil, to avoid losing heat.
Third, a Prusa heated bed, and fourth, borosilicate glass:
In combination with my 12V PSU and RAMPS 1.4 electronics, the bed warms up really quickly.
I use springs between the aluminum and the heated bed, to be able to easily level the bed.
Sanded kapton tape and some ABS juice keep my prints very well attached during printing.
As for print head, I used a J-head V. Nice and small.
I ended up using these pretty microswitch holders:
As well as this power panel:
For lighting, LED strips are great:
I've upgraded the printer in the meantime with precision leadscrews, and disabled z-lifting to avoid z-backlash, and am now getting really nice results at a layer height of about 0.23 mm :
PET sheets also seem to work much better than kapton tape so far (less tears, no seams between pieces of tape, prints seems easier to remove after printing):
Select a service to print this Thing and ship it to you
MendelMax 1.5 with integrated electronics by srepmub is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving srepmub a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure srepmub would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).