Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Printable Sumo Bot Jr Kit
by makenai, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a 3D printable version of my sumobot design at http://sumobotkit.com. It was designed for Nodebots Day in Las Vegas, NV. We were looking for a low cost alternative to expensive robot kits. With a couple of servos and a microcontroller, this is easily under $50. If you need a version that can be easily made in bulk, try the laser cut version in the SVG file!
This comes in 7 basic pieces that snap together. There are a couple of options for the top to mount a pinoccio or arduino compatible board and a curved or flat shovel. Otherwise, print two sides and two wheels and one of everything else!
You'll need a 1/2" ball bearing to pop into the hole for the ball caster on the bottom of the front. You can stretch some o-rings over the wheels for additional traction. A 4xAA battery pack will fit snugly in between the tops of the servo motors and the top of the robot.
More information and some build videos over at http://sumobotkit.com
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Printable Sumo Bot Jr Kit by makenai is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving makenai a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure makenai would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).