this enables the zesty nimble v1.2 to mount directly to an e3d v6 clone.
it is made for the left hand zesty setup.
coupling thread: m10x1mm (although the hose fitting is g1/8-28, the thread isn't)
PTFE tube: 45mm (approximately)
mounting bolts: 2x m3 x 33mm without tube holder, 2x m3 x 46mm (approximately)
holes are oversized by 0.2mm
m10 thread was modeled at size (it is a slight friction fit in my heatsink (from my printer))
spacer insert is a tight fit.
(this is a test piece, if anyone tests it it would be great to have feedback)
print flat sides down and no post processing is required