This is a tray I made for the Dreamcast and the GD Optical Drive Emulator. It has been available to buy on Shapeways for a long time, but now I am making it available on here for people with 3D printers.
Note that I have never printed this out on a FDM printer, so you do this at your own risk as I will not take responsibility for any damage to a Dreamcast. The images you see are from a commercial SLS Print. You may need to print this with supports, and I would do a 100 percent infill for strength, and print ideally at less than 0.2mm layer height and in ABS if possible. The SD extension cables are available on Amazon and eBay, and you will need 5 screws in total unless you permanently glue this in place.
I can tell you that this tray when printed properly works very well, and I use it on my Dreamcasts, it also does not restrict airflow as some other designs do. So try printing it out and have fun. Oh and please subscribe to my channel at www.youtube.com/10p6
10p6, all rights reserved.
Overview and Background
GD2SD Tray for Sega Dreamcast, Top View
GD2SD tray for Dreamcast, Bottom View