Belt Version 2.2
This is the stronger and easier to print version of https://www.thingiverse.com/thing:3270948
Please take note:
-Use 4 perimeters
-Before printing please make sure to print the file Testprint-2-2.stl first
-If the hinges are welt together it helps to set a horizontal expansion (Cura) or XY- size compensation (Slic3r) of up to -0.1. Don't go much smaller because it weakens the hinges.
Find your size:
The number at the end of the file name is the length of the belt in milimeters measured from the hooks to the middle (the 3rd) element with the corresponding grooves. In short: The number should be close to your hips measurement. Please measure your hips where you wear your belt. Do not convert your usual belt length because it often turns out to be to short.
You can use the costumizer if you miss your size.
Access to CAD files:
If you need full access to CAD (.step) files you can download them here: https://www.cgtrader.com/3d-print-models/fashion/belts/belt-single-print-mmu-design
Prusa PETG or PLA
starting at 3:30 As seen on Maker Faire Vienna :)