Wire Clip (No Assembly)

by MirageC Apr 29, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Cool design, but never managed to print it properly.
I printed about 10 pieces, all with different settings, but the two pieces fuse each time...

Just tried to print 15 from various shapes using PLA. I printed at 120mm/s. Got 5 out of ten that broke. But as initially mentioned, this design is meant for PETG.

I finally managed to print the clips (after about 15 failed prints)
The 3030 version is not correct. The spacing for the extrusion is not big enough, and it cannot be fitted to the profile
(bosch 3030 profile - https://www13.boschrexroth-us.com/Framing_Shop/Product/View_Product.aspx?partnumber=3842502538)

Great! I’ll modify it.

Is your printer working well calibrated? 100-120mm and extrusion calibration with cube wall thickness?

Comments deleted.

What size hole do these plug into well? I can see these as a great benefit in car audio!

5mm bore x 4mm thick. But easy to change.

did you actually print this i dont think it will print and still move

Just printed 10 of them in one print. They all work great!

thanks i am going to try to make some tonight i'll post a make