This beadlock wheel is for 1.9 rc crawler and scaler tires. All variations use a 12mm hex hub. I wanted a 5 spoke with a bit of a twist... and this is what I came up with. There are both CW (clockwise) and CCW (counter-clockwise) versions available. The downloads do not include the "GH" lettering on the face as shown in the picture. If you are interested in a different width, size, offset, let me know.
I hope you like printing my RC beadlock wheels. I had fun designing and making them and am happy to provide it for free. If you routinely pay $4 for a coffee or $3 for an energy drink, I ask you to consider donating or tipping me for the hours I have spent working on designing and printing these wheels. Follow me here and on Instagram (@goodsons_hobbies) to keep up with my latest work. I’m open to feedback and ideas, comment or message me I usually respond within a day.
File naming convention:
GH= Goodson's Hobbies
AA= Wheel model #
BB= tire size 19=1.9 22=2.2
CC= wheel width (inside of front and back lip *Note: this is changed from previous wheels)
DD= back spacing, distance from outside of back to inside of hex surface
For example GH08192110 = Goodson's Hobbies Model 08, 1.9 size, 21mm wide, 10mm of backspacing.
I recommend flipping the "back" file 180 degrees to print on the flat surface. Use support on all pieces under the lips.
5x M3x8 screws or 5x #4 x 5/16 (self tapping screw)
"How to" assembly video here:
If you print it, I'd love to see it, share here, or tag me on instagram.
Find me on instagram @goodsons_hobbies