A mounting plate for the PSU.
It is designed for the standard PSU coming with the Anycubic Kossel. The distance for the mounting screws is around 85 x 126 mm (note 1).
Because i didn't like the idea of screwing in iron bolts in the PSU without knowing what is on the other side, there is a version for 6 mm M3 screws/bolts and for 8 mm ones so it will not stick out at the inside. Choose the one which fits with the ones you have in stock.
The mount itself must be attached to the frame with M4 x 8mm or 10 mm.
- Print it with 4 top and bottom layers and 20% or more infill. 0.2 or 0.3 resolution. No support needed.
- Remove the thin layer (1 layer) of plastic in the two M4-screwholes (note 2)
- Screw the plate to the frame with M4-bolts and T-nuts.
- Mount the PSU to the plate with 4 M3-bolts.
Happy mounting :)
note 1- If it doesn't fit your PSU or you want a simpler look, see the customizable bracket https://www.thingiverse.com/thing:1646026
note 2-The thin layer (1 layer) is there so you don't need hard to remove support. Scrape it out with a small hobbyknife. It is a nice technique that gives a nice and smooth result (thanks to Makers Muse for the idea).