I decided to make an under slung version with a tpu canopy. It is designed to have threaded inserts put into the tpu with a soldering Iron.
It still has the 3 20x20 stack mount points in the unibody. Intended to have the Runcam split mini 2 or Caddx Turtle mini. It will fit 7 to 14 mm motor mounting. The tpu canopy has a sma mounting for the ease of mounting stubby antennas. I have also put dual rx atenna tubes into the canopy.
When installing the m3 threaded inserts into the tpu push them in an extra mm to get a soft mount.the mounting screws then can have a rubber o ring and washer so that the canopy is soft mounted.
Added rev 2 parts, Canopy rev 3 with corrected sma mount.
6/2/19 added rev 3 unibodies and rev4 canopy. This was small changes for fitting stacks and holes for mounting tbs style sma mounting.
As with the V1 This is still WIP and is waiting on delivery of parts for development. If you make it all input is welcome and appreciated.