Loading
nilsstreedain

Avengers: Endgame Time Travel GPS

by nilsstreedain May 12, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Can you add some photos of battery and LEDs?

I'm sorry, I don't have great access to the LED's and battery without taking the whole thing apart. I can try to explain what it is though. A 3mm white LED should fit perfectly through each of the holes, the positive lead can be folded up into the body of the device, then a 3v watch battery can be inserted and the negative leads filed onto, securing the battery. The bottom cover can then be clipped in to safely hold the battery and leads in place. On mine I put some hot glue between the two pieces so the bottom would have a bit of give in relation to the top so it can be used like a button, moving the leads and connecting the circuit when I press on or even just wear the device. I hope this helps, if there is anything else I can help with, please let m know!

This is really cool. I want to make this to go with a quantum suit that I'm getting ready to print. What battery did you use for the lights? Also, I don't quite understand what you said in the description of how you provided an on/off button. A photo of your wiring would be appreciated, if not too much trouble. Thanks!

I can add a photo later tonight or tomorrow, I used a small 3v button batter used in watches. I didn’t add a button, the cover piece is used as a button because the leads of the LEDs are attached to it, when the cover is pressed, the leads and the battery are pressed together allowing a current to flow.