A shoe for your Hyperlite Glide! (arm skid/guard/protector)
The arms on the Glide frame are about 9 mm wide; too narrow for foam landing pads commonly used by many FPV pilots.
These shoes will protect your arms and hardware from damage, as well as well give you ~8 mm of ground clearance!
The 7 mm hole in the bottom will allow you to access the motor's shaft screw for removal of the bell without removal of the entire motor!
My prints come out at 3.2 grams with 100% infill. Try it with about 50 - 75% infill!