The Cosmos drawing bot.
Made out of stuff laying around.
Everything made as compact as possible
no need for ekstra inkscape extension
Use the attached template
import your foto (or draw something)
extensions-gcodetool-path to gcode
open and send the gcode with your favorite gcode sender (i use SourceRabbit GCode Sender)
Layer height 0.3
Layer width 0.5
Easy printable, no support needed.
2 x 450X8 smooth rod (x)
2 x 350X8 smooth rod (y)
2 x 70X3 smooth rod (almost in any cd-rom drive)
1 x spring from a ball pen, cut in half
8 x m8uu or lm8uu bearings
5 x 608zz ball bearings
About 1.8 m gt2 belt
Arduino Uno v3
GRBL cnc shield
2 x A4988 drivers
2 x Nema 17 Stepper Motors
2 x gt2 16 teeth pulleys (use what you have with your own settings)
1 x Smalle servo (sg90)
1 x 12V 2000 mah power supply
1 x 5v 40X40X10 mm fan
Misc m3 nuts and bolts
Everything is fitted tight in the box.
Assembly the controller box in this order, was easiest for me.
connect steppers and servo
put in Uno+grbl
IF ANY QUESTIONS, DO NOT HESITATE TO ASK
If you like me design, please donate my next cup of coffee