This is the printed hardware needed for the Mandala Rose Works enclosure for the Railcore 2 ZL and ZLT printers. There are 3 different handles in there, one with Mandala Rose on it, one with Railcore on it, and one that is plain.
Also included is the hinge needed to install the top cover on the enclosure.
Update 6/10/19 - Added 2 files created by Brian Wullner. They are "lid supports" for the top lid. They get mounted on the side extrusions of the Top Enclosure and give a little extra support for the middle of the lid. You will need to insert some m3 nuts into those channels and use an m3x8 button head bolt to lock them in place.
Dark Cherry Red