Flange to convert a Mainstays mini heater and a Sterilite 30qt container into a large volume filament dehydrator. Hole sizes regulate temperature, I used three 1½" holes to maintain 117°f at 16% humidity. (larger holes=lower temperture/smaller holes=higher temperature) attach using bolt and nut greater than ½" length and less than ¼"diameter. I used patching tape to disable the anti-tip switch on the heater.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.