7/18/19 - Updated Dual Duct STL as back wasn't completely flat causing issues at the start of the print
7/17/19 - Modified/Combined Dual Duct Petfang. Now you can choose between the 2. Its not very smooth but it should do the trick
This is all of the parts needed to add Petfang and the e3d v6 to the Nereus. I did not make this but combined them together in 1 list.
Bill Kelley Made remixed the e3d v6 base for the Nereus https://www.thingiverse.com/thing:3627671
The rest of the parts are from Geetech https://www.thingiverse.com/thing:2993902
Use M3x12 screws to attach the base to the Nereus plate.
Use M3x16 screws to mount the 40mm cap to the base.
M3 square nuts required