16oz mug with a Meeple!
I made these for my gaming group for a gaming convention we are going to.
I used a 16oz metal cup from Amazon for the inside, since 3d printing food safe is just not worth it.
You can find the cups i used here :
You can skip printing the Meeple is you don't want it on yours, or if you want something else for the front, let me know and i can create a different symbol.
You need supports for the handle, it is possible to separate the handle and print it on its own but, i tried this and was not 100% happy with gluing it on the mug.
I used Cura to have the handle part print at 50% infill for extra strength but that may not be needed.
If there is interest in the separate files I will upload them so you can try yourself.
Once you have removed the support material, give the inside of the Mug a slight sanding, just to get rid of the strings.
Then, you can insert the cup, it should just twist in and stay in place, but if not;
You can glue the mug in or I left a spot for a magnet to be added to the bottom to help hold the mug in.
In my final print, I found it was not needed but your millage may vary.