Photographic Sweep Stand

by HPaul May 18, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

All files containing the arms have been updated. The actual adjustment necessary was .0005mm. I'm amazed your slicer was able to distinguish the gap.

This is the first I've heard of this, and I went back into the original file to check it. There is, in fact, a gap of less than .001mm which doesn't show up in the STL or any of the slicers I have in my machine. You should be able to adjust it out in your slicer by increasing the horizontal size compensation by that amount. I'll make the correction in the uploaded files when I have the chance and, if you wish, I'll let you know when I have.

The hinge isn't correctly attached to the arm, so the slicer prints it separately and it can be broken of easily.

Sorry, it should have read 1.75 filament. I'm correcting it in the instructions. Thanks for pointing it out.

Hello, this is an awesome design. In the summary you wrote "Assemble using .125 filament..." is that correct?