To put simply, the RadioPi Zer0 is a USB A Addon Board V1.1 attached to a Raspberry Pi Zero W with the main purpose of radio transmission. This can be used as a music player, a small SOS beacon, etc.
This device can be plugged into any power supply with a USB port, be it a wall adapter, portable power supply, etc. All I/O ports are accessible, allowing for wired programming without disassembly.
There are many tutorials for programming the Raspberry Pi for radio transmission online
Due to it's compact design, along with being able to have a portable power supply, the RadioPi Zer0 is highly mobile and versatile.
Black & Grey
Standard Print Settings:
First Layer Print Height: .30mm
Wall Thickness: .40
Wall Perimeters: 3
Brim Length: 5mm
Strip 4-5mm of insulation from a 12cm long 18 AWG wire. Solder the wire to gpio pin 7. Bend the antenna around the MicroSD card slot and pass it through the antenna port.