This particular version of the Landmaster is from Starfox zero (Wii-U)
Original design by Nintendo.
All rights belong to Nintendo, Please do not sell this model.
For this print I used 4 different colours of filament (white, blue, black and grey) to make the different colour pieces.
Super glue and sandpaper is required to assemble parts!
I have also included a full model in case you don't want to assemble the pieces
Make sure you have all the pieces printed out like this
Reminder: some parts needed to be printed multiple times (wheels and treads)
Glue the wheel pieces inside the treads like so
Do this on both sides of the tread and repeat for the other tread
Glue the exhaust piece to the back half of the body as shown
Glue cannon, cockpit and top piece to the front half of body like so
Finally, glue the 2 halfs of the main body together
(make sure you line up all the pieces properly before you glue your parts)
Glue upper and lower fins together as shown
Next glue the fins to the sides.
Ensure that the slots fit together with the holes. If not then sand the edges of the slots so it does.
repeat for the other side piece
Glue the treads to the sides with the decorated side facing outwards
Finally, glue both sides to the main body as shown
And done! your landmaster is now ready to be deployed.