Designed to be mounted on a Impulse RC Reverb frame. Should be printed using a flexible material such as TPU otherwise the camera will not be able to be pushed in.
Supports are required.
The washers that come with the Reverb kit are recommended.
Available in angles: 30 °, 35 ° and 40 °
EDIT 1: Added rounded corners because the mount was visible from the camera.
EDIT 2: Reduced thickness of mounting holes so they are less visible in FPV camera. modified so that the mount is not visible from HD camera. Total weight has been reduced to around 30 grams.
EDIT 3: Mount was still visible so I just lobbed an X shape off. Hopefully this will be the last edit.
Mount is no longer visible from the HD camera.