Artillery SWX1 Bed Handle

by SgtTaz May 25, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

I had the hole spacing issues other mentioned too. The stil file has the centres 193mm apart but the cradle on my X1 is 200mm spacing. Might be a change on the newer versions since it has a slightly different bed.

I could change the file, but have no way to see if it's right on my end as I have the 1st & 2nd revision of the printer. Why I recommend just resizing it slightly when slicing. everything else should be spot on and the only way I've found it might catch the Y axis is if you placed it below the bed frame vs. above the frame and just under the springs as it's designed. I have no issue with someone remixing this file to fit their needs or make adjustments if they want.

holes are way off plus its touching the Y gantry

Unless they made some significant change I'm not sure how it's way off or touching the gantry? Double check your slicing. I know from most recent version the holes were about 1.5mm off

Holes were off by a few mm (Unless the bottom frame has changed from ver to ver. Is it designed to go between the springs and frame?

Possibly-just resize slightly in the X direction to make up the slight difference. I've tested in on V1 & V2 as that's what I have to verify. unfortunately different printers might scale them off a bit as well. I did get slight variance from each printer but they were not way off. also yes it's designed to go between the bottom of spring and bed frame by wheels

Great job and thank you for your contribution to growing SW X-1 users community!

If I could be so rude and ask if you have flat handle with lettering but without the camera mount hole?

Thank you!

No Problem-been added to file section Flat *Logo (should be the last file on list) actually thought I added it thanks!

Thank you very much for fast response and upload!