A10 A10M Angled LCD Mount Bracket custom angle here: https://www.thingiverse.com/thing:3653232
Simple mount to rotate the LCD on the Geeetech A10 / A10M. This will reduce strain on the LCD cable by providing a better path with no sharp angles. All screw holes used are M5. No nuts required - threads are built into the model where necessary.
This modification still allows access the to the SD card.
Note 1: This openSCAD model requires RevK's ISO/UTS thread OpenSCAD library here: https://www.thingiverse.com/thing:2158656
Note 2: The final model puts the LCD 5mm further to the left than shown in the photos, away from the bed a bit more.