This set is the first DungeonStick set to use the new starlink geometric peg system, which allows semi-locking at 45 degree geometric angles (though there's some wiggle room to allow for crazy shapes). You can read more about starlink in the templates if you are interested.
This set is "ruined stone" and is intended to depict old, disrepaired, or ruined structures/dungesons/etc. For the pics, I painted as an underwater long-forgotten Atleantean city, but with different color schemes this set can work all over the place (desert ruins, mountaintop dungeon, ancient shrine, etc).
The set contains:
2" & 3" wall sections, both regular and damaged.
wall end pieces (including archway and regular)
large (4") and regular (3") archways
all possible couplers
This gives you the freedom to make all kinds of shapes, walls, etc. These print FAST and EASY - a 3" stick prints ~40 mins, and none of the pieces require support. If your printer doesn't have great adhesion, I recommend printing with a small raft, to thelp peg adhesion (though many people print them right on the build plate with no problem).
Tile sets have their place, but for organic caverns they are unruly and hard to use. To that end, I developed DungeonSticks - a "2.5d" terrain system built of walls and entrances to build out your caverns (on top of a battle map/mat, table, etc) with the focus on quick/easy setup, portability, player visibility, and easy printing/painting. The connection system is a simple drop-in rotating joint that requires no additional clips or fastening mechanism, and allows the walls to move to fit organic shapes. The goals of this system are:
Faster and easier than complete tile sets to print, paint, and setup
Reusable, flexible, and combinable with very minimal teardown / setup
Easy storage, transportation, and stacking when not in use
Create an 3rd dimension effect without the need for full floors/walls (by leveraging short walls and full-height doors, columns, etc)
Offer nearly-zero visual impairment or sight blocking for players on the table.
Not sacrifice design/aesthetics, but make the pieces beautiful for players to look at and full of detail without overcomplicating painting.
Harken back to an old-school "runehammer-esque" feel when used on the table.
DungeonSticks: Caverns contain a set of base construction items to build themed organic caverns of all types including walls, couplers, and entrances. They are designed to work with 1" grid systems with limited loss of playable floor space in the interior.
A typical "stick" prints in about 1 hr and an entrance in about 1.5 hrs. They require no support and minimal infill, and you can fill your print bed up with these overnight and print a full set in as little as a few days. Perfect for adding a 3rd dimension to your last-minute one shot!
All pieces are designed to be printed best @ .2mm layer height, but larger layers should work OK and keep peg/locking system in tact. They require little infill (10% or so) but I personally like 20-30% so they have a little weight to them. No supports are needed for any of the pieces.
NOTE- you can mirror every piece in your slicer to get more variations
More from Toy & Game Accessories
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving ecaroth a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.