The Dildon's Inept Casefeeder Kludged™ (abbreviated DICK from now on) will fix most common issues with a popular casefeeder.
Tested at full speed.
THE CASEFEEDER VAT WILL NEED TO BE MODIFIED - two small holes will need to be drilled.
Things you need:
- length of iron wire (1mm preferred)
- drill and a 1-2mm drill bit
- two WOOD screws (sharp)
- two washers
Then check out the photos and figure it out. I ran this, before releasing the 3D model, for 1 hour with ZERO malfunctions that were due to the case deflector getting stuck. I had 5 other stoppages but they were of different origin.