This is a camera mount pod to facilitate high angle flying with the new Caddx Tarsier FPV/HD camera on an iFlight 5" Lowrider frame.
The camera tilt can move from 20° to 70°. There are small notches on the rim around the lens to denote tilt in 10° increments. For 20-40° the marks are on the front of the mount and line up with the side edge of the bottom lens. 50-70° are marked on the top of the mount, and line up with the edge of the top lens.
Included is a standoff mount so you can mount the board of the Tarsier into the nose of the quad without drilling any holes or using screws.
A 1300mAh 4s, or 1050 mAh 6s lipo should mount almost flush behind the camera pod
4x 8mm M3 screws for an iFlight frame
2x M2 screws
Mounting for the iFlight iX5, other iX models, and lowrider, should all use the same forward standoff/screw pattern.