This is a 12v LED Strip rail mount for the CR10s Pro or any printer with the same size rails. A bit more involved of a setup but can be completely removable from printer. It's meant to sit behind the hotend rail and illuminate the nozzle and layers below. I used mult-color LEDs for cool FX but you could use any kind. I've included links to the items you'll need to assemble/install. (Buck converters are needed if you don't already have them installed because the LEDs are 12v and the printer is 24v.)
Print vertically with the cylindrical portion at the bottom to avoid support structures inside the rail or the cavity on the back.
See the attached images for a step-by-step assembly of the LED bar. I routed my wires inside the rail, between it and the red backing plate of the x-motor, but you can route them any which way you like.
More from 3D Printer Accessories
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving sandreezy a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.