If you found this design very helpful or otherwise wish to buy me a cup of coffee
( helps keeping the brain active so i can create new stuff ) ;-) ,then please
consider using this link :
I am just about to convert my I3Mk3 mmu2 into a bear frame and into I3mks and mmu2s
and when printing all the parts for this ,i thought that i would try to redesign the Knob for the
Lcd ,because ,though it do work as it should my finger all-ways slips from the tiny "peg" .
Because of this i designed this new one out ofthe old one ,so now you can place the tip of
your finger in the little extra indent and without any problem rotate the knob and even press
the knob without moving the finger to the big indent in the center and the knob do not occupy more space than the old one ,so it does not block the reset button.
This print consist of 4 .stl files that you can choose to print in up to 4 colors if you should
decide that or print it all in single color .
Be aware of that the lines on top off the button is very small ,and my print came out without
all-most no visible color change ,it's black where it have to be black ,but i think if you choosea color that is not so close related to each other as i have ,the top color change will show a bit more than mine :-)
3de Carbon Petg Premium - Danish brand Carbon Petg
Since i wanted to print everything for the upgrade
to the I3mk3s mmu2s Bear in Carbon Petg
"because of the very nice finish " i printed this
knob in the same material ,in my experince
Petg does not print very well under 0.2mm ,
but if you printed this in pla or abs i would
recommend to print this in 1.2 or 1.6 to get a
cleaner surface in the 2 indents in the top .