My Wyze Cam Pans have a habit of "walking" off the cabinets I place them after awhile. These aren't terribly special or unique, they y just fit my needs perfectly. You'll need to purchase some tripod camera mount screws and mount the cameras prior to screwing the mount down. This can be tricky, but I found if you push the two wood screws in their holes prior to mounting the camera with the tripod screw, and then turn the camera 45 degrees, it gives enough clearance to engage the screw head.
Amazon Basics PLA
I set all speeds to 40 mm/s
For some reason my Fusion 360 and my Qidi Slicer don't speak the same language. The correct dimension along the X and Y axis should be 2.375 inches. Set it to that and it should print correctly. My Qidi slicers keeps opening any .stl file using mm (so 2.375 inches opens as 2.375 mm.)