This box is based on:
- FB Aka Heartman/Hearty 2016 -
- http://heartygfx.blogspot.com -
- OpenScad Parametric Box -
- CC BY-NC 3.0 License -
Thanks for making this available
I originally made this box from PLA-CF. As you can see from the pictures my Meade 10" rolled over onto the box in the back seat of my truck. Oooops....... Re printed in ABS - should be better. Note the text does not print acceptably in ABS - a larger font may help.
K4200ST175-COA PLA-CF (carbon fiber)
Rotate each part so it lays flat on the printer plate so no supports will be required.
.1mm / layer takes about 14 hours to print but the nice finish is worth it.
To print each piece individually there are switches to allow .stl export by piece (bottom, top, front panel and back panel.
To print the back panel with holes and lettering the front panel code needs to be commented out and the back panel code needs to be uncommented.
I used these large din connectors as I had them left over from another project. Mini-din connectors should work just fine.
This box is easily modified: Read my notes near the beginning of the file.
I now recommend ABS as the PLA-CF softened and deformed while in the back of my truck.