This is a complete Remix of Stumphoppers https://www.thingiverse.com/thing:229975.
With Bearings and more stable.
Wind Direction Indicator 1 has a bit of an Spaceshuttle, second One as 911 Turbo.
Design your own!
A complete.stp is included for any Changes.
You need 2 608 Bearings, 2 M8 Nuts, 1 M8 Nyloc Nut, 1 M8 threaded Rod and Superglue.
First fit the Arms with Superglue to the Rotor. All in same Direction ;)
Put 2 M8 Nuts on the threaded Rod. Later counter them at the perfect Height.
Then Bottom@Rod, Rotor with Spacer@Rod, Top@Rod and Direction with Spacer@Rod. On Top the Nyloc.
Have a Look on Rotor/Arms to bring them spinning exactly horizontally.
If not, adjust it with an little Hammer ;)
At least screw all together with Care:
Adjust Rod and Nyloc on the Top to one Height and fix it all using the 2 M8 @ the Bottom.
Give some light Bumps to the Rods Bottomend, so that the Bearings came in align Position and all can run freely.
Dont forget 2 counter!
All you have to do now is to search a perfect Place, fix it there and wait for some Wind =)
Shortet the Spacer for Direction Indicator to 7mm, increased the Rudder for better Indication.
Added my Sign ;)
direction.stl and complete.stp are the new one.
Remembering my 911 Turbo (930) from 1987 i designed and added an additional Indicator. Supports recommended.
An 930.stp is included so feel free to design your own Indicator.
Let me know about your Makes and Ideas just here ;)
Added a indicatorbase.stp as Basis for your Designs. The Black One shows the Space needed for the Top Nut. Indicator Thickness ~3mm.
Added a Mobile Home Indicator. Print it flat and glue it together. A .stp File is included.
Tronxy X5S & Wanhao Di3 V2.1
Formfutura ApolloX ASA
Supports needed only for direction.stl
I used ASA, the "Outdoor Filament". Feel free to use ABS or PETG ;)