case&stand for SIPEED Maixduino
-This Thing is a simple boxy case and stand for Maixduino.
-In order to assemble the stand, 4 pairs of M2.6(10 or 12mm) bolts and nuts are required.
-Perhaps, due to the revision and improvement of Maixduino, this thing may not be suitable for it.
CAD file : case045_.stp (.123dx)
-Regarding ; case045-spk.stl
case045-spk.stl is a tray for attaching a small thin speaker.
A small speaker about 4 to 5 mm thick is suitable.
However, I have not tried it because I do not have the right item for it.
A cylindrical mobile battery with a diameter of about 22 mm can be used instead of case045-stpv.stl.
?How to make the camera module position more stable?
...Prepare a piece such as an eraser shaped to roughly 3x3x15mm.
...And it would be nice to paste it as shown in the picture.
case058.stp (.123dx) has been added.
Its contents are "case058-top2.stl".
-"case045-cam.stl" and "case045-top.stl" are integrated to "case058-top2.stl".
-SD card and rese/boot button can be operated easily.
Please refer to the added photos.
Top Solid Layer=3
Bottom Solid Layer=3
Skirt Offset from part=0
Support Infill %=30
Extra Inflation Distance=0
Support Base Layers=0
Support pillar Resolution=1.00mm
Max Overhang Angle=30deg
Support Infill Angles=60deg