This is a small rack for 1.5 ml microcentrifuge tubes (11 mm diameter). 20 tubes can be stored in the rack.
The rack consists of four different parts which have to be put together and can be secured with two M3 nuts and two M3x16 screws if necessary.
Print the following parts:
- 1 x tube_rack_top
- 1 x tube_rack_bottom
- 2 x tube_rack_side
The parts are very easy to print, since they are completely flat. No support is required, layer height doesn't matter (I recommend 0.2 or 0.25 for fast print speed).