It's a remixed part from the JGAurora A5X Bondtech mount by seaspotter https://www.thingiverse.com/thing:3259649
I improved the part so that we can mount the original sensor runout.
A PTFE tube is required between the entrance of the Bondtech BMG and the output of the Runout sensor.
Insert the PTFE tube into the BMG and cut the length flush (see picture) and then install the runout sensor.
There is also a support to attach the braided wire sleeve on the side with holes for zip ties.
Printed and tested sucessfully 2019/06/20
4 solid layers on bottom and top
3 peripheral layers