32 Slot Braiding Loom used for bracelet and rope making for jewelry.
Designed in Fusion360.
100% = 3.5 in diameter in width; 0.195 in in height
Do not recommend scaling smaller than 85% due to tolerance of slots for thread.
Atomic Filament 1.75mm PLA
Layer Height: 0.15 mm
Infill Pattern: Rectilinear
Outer Shell Speed: 25 mm/s
Inner Shell Speed: 40 mm/s
Extrusion Width: 0.4 mm
Top Solid Fill Layers: 8
Top & Bottom Solid Fill Pattern Type: Concentric
Total Print Time: 3 hr 17 min 14 sec