Fixed 3 things:
The leg end had a hollow opening behind one of them (repaired similar to the other remix available)
The attachment to the heads was slightly loose (depending on the tolerances of your printer)
The total length was a little short (52.5 inches) slightly increased the leg size to get closer to the standard 60 inch wind.
Shoutout to the original designer:
Great design - with the few modifications I was able to get a print that is working quite well!
0.16 Variable (Creawsome Mod)
I printed the legs horizontally with tree supports and a brim to help with adhesion.
I chose the tree supports because it was easier to remove from the hollow end on leg # 1