Remix of zhoujianfu's design here: https://www.thingiverse.com/thing:68429
This model can be printed with the pillars sticking up or laying flat. 0% infill works well if laying flat.
- Moved the SSD m3 holes 0.5mm for a better fit
- Made SSD M3 holes wider so the screw goes through the plasic without gripping it
- Removed two of the support pillars to save plastic (I need to make a few of these)
zhoujianfu's original description:
There are a number of 2.5" to 3.5" hard drive brackets on thingiverse, but ALL the other ones don't seem to be for hotswap server bays with drive caddies (because they don't mount the SSD in the required position).
That may be because you can just screw your SSD into the corner of the caddy with two screws, but if you want it to be a tiny bit more secure, just print this out and screw it to the SSD drive (and then to the caddy).