Dual Z Axis Upgrade for Ender 3Pro / Ender3
Created the Z Carriage mount with spacers to add a second Z axis to my machine. You will need to print the Carriage and 3 spacers. I included 2 Lead screw knobs with set screws to assist in adjusting your Z heights.
Need a motor mount for your second stepper?
Find it here: https://www.thingiverse.com/thing:3741936
Need to move your Ender 3 Pro PSU to accomodate the second Z Motor?
Find it here: https://www.thingiverse.com/thing:3742126
You will need the following hardware to mount your carriage
(2) M5 X 35 Cap Head Screws
(1) M4 X 50 Cap Head Screw
Share your makes
Any feedback is always welcome
Follow Me on Instagram to see my latest projects.
All spacers through holes are undersized and need to be drilled out to the proper bolt clerance. These holes may be oversized which will allow for a little adjustment in position if needed.
The eccentric nut wheel stays exactly how it is. Do not attempt to mount it to the new carriage plate or it will no longer be adjustable.