I wanted a cable chain clip that would swivel. Remixed the cable chain clip by moclub to do the job.
Once printed push parts together.
Breaking it down
Only had a .stl file to work with, which would not open in fusion 360 as a solid part to be modified. With a little googling found out you can use free cad to make a .step file from the .stl file which then you can open in fusion 360 and modify.
Took the clip and split it into the clip part on the bottom, and the cable chain part on top. Gave the top part a 30 deg. angle for the chain made a pivot hole in the center at the bottom. On the bottom clip part a post was made with a slight knob at the top to secure the top part once they are pushed together.