The inner diameter of the flat profile M4 screws was wrong. The measuring went from radius to diameter without me noticing it.
New correct version has replaced the faulty on.
Sry guys, my mistake.
I wasn't really happy about the location of the filament stepper motor, so i tried to design something useful and now after installing everything i'm happy to be able to show it to you.
The goal was to relocate the motor, to minimze the tube length (21cm shorter than before!), design a holder as stiff as possible buy using as less material as possible and to make it easy to print.
I also used the original hardware to mount the stepper in the first place.
With the new location and the capricorn tube i hope I'm able to step up the quality of my prints, especially to reduce the stringig with petg.
If you like it and/or it works out for you, please leave a comment and a "make pic".
I would really appreciate it
Resolution to your liking.
I printed it with 20% infill and wouldn't suggest to print it with less than that.
I made two types:
- _con for countersunk version; M4x16 used
- _zyl for cylindrical version; M4x16 used
I have used the provided hardware to mount the motor to the adapter (screws and t-nuts)