X-Carriage compatible with the MK2.5S / MK3S Bondtech Prusa Extruder with the Revised X-axis
This X-carriage is specific to the MK2.5S / MK3S Bondtech Prusa extruder (the non addon version).
Designed for 2GT belts. If you want to use GT3 belt, please check out this remix by garnichda
MK3S X-carriage - Link
MK2.5S X-carriage - Link
Compatible ONLY with the Revised X-axis or Bear X-ends
This is a small edit to the existing MK3 remix I did, please consult this post for more details about assembly, BoM, credits etc.
STEP files are included for your modding pleasure and convenience. STL files were sliced and checked with Slic3r PE. Any constructive feedback is welcomed.
0.2mm (highly recommended)
I printed the parts from PETG, 0.4mm nozzle, 3 perimeters, 30% infill, 5 top/bottom layer which works quite fine for my prints. That being said, the 3D model isn't strictly tied to those settings, feel free to adjust them to your liking.
I would say it safe to stay within these limits:
5-7 bottom/top layers
Perimeters affect the strength of the parts the most, but also add weight the most. I would balance the amount of infill according to how many perimeters you choose. The number of bottom and top layers shouldn't be much of a factor for most of the printed parts, and its safe to use 5 regardless of infill/perimeters.
(15/04/2019) Changes compared to the previous versions.