Require a print volume off 300x300x400 !
UNTESTED - PRINT JOB IN PROGRESS
New vers of Main Body. Estimate print for 0.2/40mm/20%infill/1.6mm walls... 8 days and 9 hours.Print with support.
Just finish to print the CONE ... 5 days... and some change!
4 IN CONNECTION - D.Ext. 101mm
VERY LONG PRINTS!!! 4 TO 8 DAYS! PER COMPONENT!!! (40mm/s)
The bracket below suction connection is design to allowed printing without support. Need to be cut as is required !
Use suport for Main Body!
Design to print with support! :( By COSTA