I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own.
I designed 2 versions of the case, one that will fit any MK3 (see photos) and one regular case.
The lid has holes for a 40x40x10mm fan.
M3 x 6 mm screws would work best to secure the Pi & Stepdown. Same goes for the lid, M3 x 10 (or 12) sunkhead. Longer work as well. I used spare sunkhead screws that you would use to attach the heat bed.
The case should work for all Pi's version 2 & up.
Note: Raspberrys default holes are somewhat small, I used a 3mm Drill to bore out the holes. I think they are 2.8 ish. You might be able to squeeze a 3mm screw trough it tho.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.