Dummy of a diamond hotend/nozzle clone. Specifically a 2in-1out type
I have included placeholder geometry for the heatpipes and first fin of the heatsink to facilitate alignment with whatever model you chose to use for that. (and so I don't need to include someone elses model/license in this thing)
Internally - I'm just guessing based on schematics and intelligent adaptation.
Externally - Should be quite accurate. I've printed tests to encapsulate the model, and the prints fit the actual nozzle almost perfectly. Am currently printing initial tests of a hotend design using this dummy, so I will adjust it if I find issues.
I noticed some variation in the heatsink angle, so to figure out what mine is I made diamondTEST*.blend
To use it just change the text to whatever angle you intend to test....and then select and rotate the heatsink to suit... group select the printable objects and export them as stl and print it to test fit.
I included some diamondTEST*.stl files that I used to figure out that mine is essentially 27.3degrees
More from 3D Printer Extruders
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving BETLOG a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.