The P47 of 3DLab has a very wide square Lipo bay in front of the nose. newer Lipos do not need this huge place and are not easy to fix in place. foam and other stuff needed. This printed frame fits for 2200 lipos. 107 x 24 x 34. insert the lipo in the inner frame.secure it with the clamp.
and insert the whole frame inside the lipo bay from the Plane.Its automatically secured by the 2 bolts. for unplugging simply press slightly the two round pads and pull. then charging is easy. also some lead can be removed due the weight of the frame. motor 3530 1100 kv 2200 Lipo
This is designed for the P47 from 3DLab. Others will come.
the clamp is printed with 0.4 nozzle but width set to 0.3. 2 perimeters 40% infill.
added clamp .increase bay stl x and y by 1mm in Percent for better fitting in the bay.. depends on printing width.
2 perimeter 7 bottom 2 top print it standing like a tower. no fan.