This is a remix of davidguo123456 Nerf Compatible model of a TA01-D-100555 trijicon Acog hybrid reflex scope. As I customize and mod a lot of my Nerf blasters, I end up with picatinny rails instead of the Nerf rails. So I decided to "mod" this scope to fit picatinny rail. My original version 3 print was a bit tight on a Worker style rail that I tested on so I increased the tolerances by 5% but have not reprinted it.
This remix also has removed arm portion of the built in "iron sight" as it was prone to easily breaking off and needed a LOT of material for support when printing. I have also put a hole for a screw if the model is loose on the rail.
It does include the original top mounted reflex site to print separately and add on if desired.
Note: I had better luck flipping the model in the slicer and printing it with the eyepiece on the bottom. It does require a bit more support than on its side or how the STL file has it, but it provided a smoother quality print.
EDIT: I uploaded a minor change to the file. I rotated the STL so that the scope is easier to view in 2D and repaired 3 minor mesh errors using Mesh Mixer. New file is tagged as V5, If you have already printed, you aren't missing anything new.
Complete model pictures coming soon.
3D Solutech PLA